RAID Japan Killer-D

Contrary to its appearance, KILLER-D is a lure that has the mysterious power to devour monsters by simply winding it slowly around the surface of the water while making a pleasant sound.

How to use:

Cast and slowly reel. At this time, without pulling the line too much, just keep the retrieval speed so that the KILLER-D feels most comfortable and the tail blade makes a wet, high-pitched, comfortable metallic sound. After that, KILLER-D will attract fish on its own.

The rod position will vary depending on the height of the foothold and the distance to the lure, but you can maintain a good sound by adjusting it to a position that is neither too high nor too low.

Intense turbulent water flow and high-pitched metal sound

The cup-shaped depression at the rear end of the body, which is a characteristic of KILLER-D, is a special gimmick that powerfully engulfs the water flow passing through the body and emits an intense turbulent flow backwards. If you look at the complex and thick ripples that appear at the rear of KILLER-D, you can see how powerful the turbulent water flow caused by the cup-shaped tail design is.

The original bronze tail blade generates its power when rubbed by the turbulent water flow. Unlike regular blades, the blade material is bronze, which is used in wind instruments, cymbals, bells, etc., to achieve a high-quality metal sound that is hard, high-pitched, and elongated (reverberation).
Sound is produced by adjusting various factors in a well-balanced manner, such as ``action (swing width),'' ``distance to the water surface,'' ``amplitude pitch,'' ``distance between blade and body,'' and ``blade size/weight.''

High-strength metal plate lip made of duralumin A

Metal plate lip made of duralumin is a high-output part that brings light action to the large body KILLER-D. By slightly cranking the blade at an exquisite angle, the action feels light, and by tilting the body forward, the exposure angle is adjusted to maintain the proper positional relationship between the blade and the water surface. This creates a mellow, caged sound quality in addition to the metal sound.

Offset hook position
Hooking performance is improved by installing pedestals on the front and rear hook hangers and providing an appropriate distance between the body and the hook.

Product Description:

Length: 3.25"
Weight: 1.5oz